Application Guidelines

Applying Flamecheck Plus is a straight forward process; by following our simple application guide you can apply Flamecheck Plus to a range of different absorbent materials (see appropriate test reports).

PRIOR TO STARTING APPLICATION

• Complete a risk assessment prior to use.

• Appropriate PPE should be used for application including gloves, goggles and where required a mask.

• The surface to be treated must be clean and dust free.

• Remove all loose cushions and coverings, treat each one of these separately.

• Test the fabric to be treated for absorbency and colour fastness: spray Flamecheck Plus on a small unobtrusive area of each type of material and allow to dry prior to general application.

This treatment is a temporary solution and should be re-applied annually,
IT IS ESSENTIAL IF THE MATERIAL GETS WET IN ANY WAY TO RE-TREAT IT TO MEET FLAMMABILITY REQUIREMENTS. 

Keep out of reach of children.

Do not apply with compressed air.

Do not inhale vapour.

This product should not come in contact with skin, either during application or afterwards when dry. It is therefore not a suitable application for clothing or costumes.

If swallowed or inhaled seek medical advice immediately and show the container or label.

Please be aware that in all circumstances it is the responsibility of the Purchaser of any surface treatment flame retardancy product(s) to satisfy themselves that the measures they have taken to prevent the spread of fire are adequate, conform with any legal and code of practice requirements applicable to the territory and are documented in the Purchaser/Users design information, risk assessment and related method statement for the works in question.

Flamecheck Plus is a clear liquid with a light straw tint and a mild pine scent, discoloured or strong smelling product should not be used and must be returned to the manufacturer for replacement.